Compatible with all three tiers! Choice of silver or black.
- To make a double sided saber: Unscrew the bottom piece of your saber VERY carefully. When you take this piece off you are exposing the inner electronics, therefore it is pertinent that you do not disturb the wiring, otherwise you may damage your sabers ability to work properly.
- Once you have unscrewed the first saber, screw the coupler on to it (KEEP the circular mesh piece inside, do not remove it when you take the end off).
- Once the coupler has been screwed on to the first saber, you should then carefully screw the end off of the second saber and attach it to the coupler. Please be sure to screw the coupler on tightly to both ends so that it does not become loose during use.
- Stow the ends of your sabers in a safe place, if you lose them you will have no bottom to your saber when you uncouple the sabers.
NOTE: when attaching the coupler, make sure the wires do not become twisted. If they become twisted they could disconnect.
Extensions damaged during combat are not covered under a warranty.
If you are not satisfied with your extension you are responsible for return shipping. We will fully refund you for the price of the extension within 14 business days.